35 Watts Aluminum 2 Face COB Chips 4 Colors Flashing LED MINI Motorcycles LED Headlamp Bulbs LED Motorcycles Bulbs

35 Watts Aluminum 2 Face COB Chips 4 Colors Flashing LED MINI Motorcycles LED Headlamp Bulbs LED Motorcycles Bulbs

How to install a motorcycle spotlight yourself

Installing a motorcycle spotlight requires some electrical knowledge and tools, and here are the general steps:

1. Prepare tools and materials. You need an electric drill, screwdriver, wires, fuses, switches and other tools as well as the spotlight itself (including the bulb).

2. Determine the installation location. Find a suitable location above or on both sides of the handlebars of the motorcycle to install the spotlight. Make sure the direction of the spotlight meets your needs.

3. Drill a hole. Use an electric drill to drill a hole in the handlebar that is large enough for the wire to pass through. Make sure not to drill through the plastic shell, but only drill to the metal frame.

4. Connect the power supply. Lead the power cord of the spotlight from the battery box and connect it to the power supply on the motorcycle. You may need a conversion plug to achieve this operation.

5. Install the switch. For safety reasons, you should install a switch for the spotlight. You can choose to install it on the handlebars or somewhere else near the handlebars.

6. Fix the spotlight. Use a screwdriver to fix the spotlight in the drilled hole. Make sure it is firmly fixed in place and will not shake while driving.

7. Wiring. Lead the power cord of the spotlight out from behind the handlebars and wrap it with insulating tape.

8. Install the fuse. To prevent fire caused by overheating or other electrical problems, you should install a fuse on the power cord.

9. Test the spotlight. After installation, turn on the switch and check whether the spotlight is working properly. If it does not light up or there are other problems, check the wiring and adjust it.

10. Done. Now you have successfully installed the motorcycle spotlight! Please pay attention to safety during use and comply with local regulations.